Amperage | 30 Amp |
Volts | 250 Volts |
Poles and Wires | 2 Pole, 3 Wire Grounding |
Blade Material | Brass, nickel |
Terminal Screw Material | #8-32 Steel, Chromate |
Ground Screw Material | #8-32 Brass |
Housing Material | Thermoplastic Elastomer, Yellow |
Dielectric Voltage Withstand | 2,000 Volt Minimum |
Current Interrupting | Certified for Current Interrupting at Full Rated Current |
Temperature Rise | Max 30°C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75 |
Accommodations | .300 in. - .655 in. Cord Diameter |
When properly installed rated for NEMA 4, 4X, 6, and 6P. Also meets IP65, IP66, and IP67 ratings. Male Plug is mounted (terminated) on a power cord and interfaces with either a female connector or female receptacle/outlet.
Interfaces with appropriate Woodhead, Leviton, Pass & Seymour, Cooper, Ericson, and Bryant Watertite wiring devices. Assure the Plug will fit on the cord you are using and will mate with the female side. The female side must also have a compatible seal to maintain Watertight rating.